Semco® model 507-A gun distributed by Bergdahl Associates, Inc.

	Bergdahl Associates, Inc. - Authorized Distributor
		Home > Semco Products > Dispensing Guns
Semco Model 507-A high pressure injection gun

The Semco^® model 507-A high pressure injection gun is designed for the post assembly injection of MIL-S-8802/AMS-S-8802 Class B sealants into confined areas and voids, including channel sealing and areas that require material to be injected through small orifices under pressure. The Semco model 507-A gun is designed to accept sealants that are prepackaged in Semco® 6 oz. polyethylene cartridges and equipped with a Semco plugged wiper plunger. The gun cap is threaded to accept a 1/8" pipe thread needle nozzle or zerk type connector. The ram rod has a diameter of 3/16" and a stroke of 1". Each forward stroke delivers .027 cubic inches of material. Air pressure on the power head piston is multiplied by a factor of 40:1 at the nozzle end of the ram rod.

Technical Data Sheet for the Semco 507-A high pressure injection gun

Maintenance Instructions with exploded view of gun

For more information about Semco^® 507-A gun contact Bergdahl Associates, Inc.

Return to Product Index

ATTENTION - Documents with a

are stored in PDF format. In order to view and print them, you must have the FREE Adobe Acrobat Reader which is available by clicking the icon on this page.

Issue date: 03/2007

For more information about Semco® 507-A gun contact Bergdahl Associates, Inc.

For more information about Semco^® 507-A gun contact Bergdahl Associates, Inc.