Lord 201
Acrylic Adhesive for Metals and Plastic
Description
Lord®
201 acrylic adhesive bonds a wide variety of prepared or unprepared
metals and plastics. Lord 201 adhesive replaces welding, riveting and
other mechanical fastening methods.
Features and
Benefits
Bonds Unprepared Metal - Requires little
or no substrate preparation.
Fast Cure - Cures quickly at room temperature.
Good Flow - bonds irregular shapes and hard to reach substrates.
Environmental and Chemical Resistance - thermosetting; resists dilute acids, alkalis, solvents, greases, oils, moisture, and weathering. Performs at temperatures from -40°C to 149°C (-40°F to 300°F). Excellent UV exposure resistance.
Versatile- bonds many different substrates. Can be used with both Mix-In and No-Mix accelerators. Insensitive to minor deviations from correct mix ratio
Typical Properties of Lord 201 Acrylic Adhesive*
|
|
Lord 201 | Accelerator 4 | Accelerator 17 | Accelerator 19 |
| Appearance | Off-white liquid | Slightly hazy to clear amber liquid | Off-white to slightly yellow liquid | Off-white paste |
| Viscosity, cP | 15-55,000 | 10 | 10,000 - 100,000 | 150,000 - 450,000 |
|
Brookfield |
(Spindle 5 at | (Spindle 1 | (Spindle 4 | (T-bar C @ 10 rpm) |
|
at 25°C (77°F) |
20 rpm HBT) | at 30 rpm LVT) | at 12 rpm LVT) | |
| Density: kg/m3 | 1061 -1 043 | 1222-1246 | 1162-1210 | 1426-1546 |
|
lb/gal |
8.5 - 8.7 | 10.2 - 10.4 | 9.7 - 10.1 | 11.9 - 12.9 |
| Solvents | None | Methylene chloride/ MIBK/Trichloroethylene | None | None |
| Flash Point (Closed Cup) | 18°C (66°F) | >93°C (>200° F) | ||
| >93°C (>200° F) | >93°C (>200° F) | |||
|
Working Time of Mix System |
5 - 8 Minutes | — | — | — |
|
Handleable
Bonds at 24°C (75° F) |
12 - 16 Minutes | — | — | — |
| 90 Percent of Ultimate Strength | 2 Hours | — | — | — |
| Full Properties | 24 Hours | — | — | — |
| Mix Ratio by Volume | 10 Parts | No-Mix | 1 Part | 5 Parts |
| Shelf Life from date of shipment,24°C (75°F), | ||||
|
unopened container |
6 Months | 6 Months | 6 Months | 6 Months |
*Above properties data are typical and not to be used for specification purposes. For specification data, contact our Customer Service Department.
LORD 201
Technical Data Sheet
For more information about Lord 201 contact Bergdahl Associates, Inc.
| ATTENTION - Documents with a are stored in PDF
format. In order to view and print them, you must have the FREE Adobe Acrobat Reader which
is available by clicking the icon on this page. |
 |
Date issued: 06/05