Lord 370
Impact Resistant, Black, Epoxy Adhesive

Description
Lord^® 370 is a two-component epoxy structural adhesive used to bond back-coated acrylic to chrome-plated thermoplastic surfaces.

Features and Benefits
Convenient Cure Properties - provides handling strength at room temperature in 3 - 4 hours; work time in 60 - 90 minutes. Cure can be accelerated with heat.

Contains No Solvents - provides 100% solids content, nonflammable, and virtually odorless.

Saves Time - reduces cure layover time due to the reactive adhesive system.

Safe for Painted Surfaces - applies easily to painted surfaces. Will not attack, distort or discolor the finish.

Environmental Resistance - thermosetting; resists thermal shock, thermal cycling and exposure to humidity.
 

Surface Preparation - Remove soil, grease, oil, fingerprints, dust, mold release agents, rust, and other contaminants from surfaces to be bonded.

In most cases, metal surfaces which are free of oxidation need only an isopropyl alcohol wipe. Use an abrasive material to remove tarnish, if necessary. Always follow abrasion by a second degreasing to ensure removal of loose particles.

Handle prepared surfaces carefully to avoid contamination. Assemble as soon as possible.

Mixing - Non-automated

Measure each component to meet the mix ratio requirements. Thoroughly mix the components until uniform in color and consistency. Do not whip excessive air into the adhesive.

Typical Properties* of Lord 370 Adhesive

* Data is typical and not to be used for specification purposes.

Technical Data Sheet for Lord 370

For more information about Lord 370 contact Bergdahl Associates, Inc.

ATTENTION - Documents with a are stored in PDF format. In order to view and print them, you must have the FREE Adobe Acrobat Reader which is available by clicking the icon on this page.

Date issued: 07/05
v3 4/04