Lord 459T
One Coat Primer
Description
Lord® 459T primer promotes adhesion to thermoplastic elastomers (TPE), polyolefins (TPO) and EPDM. Lord 459T primer is prediluted with toluene; ready for direct application.
Lord 459T primer can be used in conjunction with Lord acrylic adhesives, urethane adhesives, epoxy structural adhesives, and cyanoacrylate adhesives, as well as with a variety of double sided tapes.
Features and Benefits
Effective - very low dry
film weights required to enhance
adhesion with coatings and double sided tapes.
Versatile - enhances adhesion to difficult to bond elastomers, increasing the adhesion of adhesives, coatings and double sided tape.
Ready to Use - requires no dilution. Low viscosity. Easy to apply.
| Appearance | Liquid |
| Color | Straw yellow |
| APHA Color | 500 maximum |
|
Viscosity,
cP @ 25°C (77°F) |
1 - 15 |
|
Density
kg/m3 lb/gal |
863 - 875 7.2 - 7.3 |
| Solvents Shelf Life |
Toluene 6 months from date of shipment, unopened container, at 21°C - 27°C (70°F - 80°F) storage temperature. |
For more information about Lord 459T contact Bergdahl Associates, Inc.
Technical Data Sheet for
Lord 459T 
| ATTENTION - Documents with a are stored in PDF
format. In order to view and print them, you must have the FREE Adobe Acrobat Reader which
is available by clicking the icon on this page. |
 |
Date issued: 07/05