baslug.gif (578 bytes)   Bergdahl Associates, Inc. - Authorized Distributor
  Home   >  LORD Engineered Adhesives  >  Urethane Adhesives  >  Lord 710


Lord 710
Black Equal Mix Urethane Adhesive

Lord 710 has been discontinued because Lord has been experiencing issues procuring a key ingredient.  Lord has suggested Lord 7100 and Lord 7150 as replacements to the impacted products.  They have verified, by laboratory testing, that the 7100 and 7150 meet or exceed the performance characteristics of Lord 710.

Description
Lord® 710 adhesive is a two-part high strength black urethane adhesive used to bond cloth, paper, plastics, foams, rubber and painted metal. Lord 710 adhesive can be either room temperature cured or heat cured for faster processing.

Features and Benefits
Tough High Strength Bonds - creates strong and durable bonds.

Proven Environmental and Chemical Resistance - resists solvents, weathering and aging.

Nonflammable - does not require expensive explosion-proof equipment. Will not deplete the ozone 

100% Solids - contains no solvent. No VOC content.

Will Not Craze Plastics - bonds to plastics without crazing, attacking or lowering the strength of the plastic substrate.

Variable Cure - cures completely at room temperature or more quickly with heat.
 

 Typical Properties* of Lord 710 Adhesive 

 

Lord 710A

Lord 710B
Appearance Off-White Black

Viscosity, cP
@ 22°C (72° F)

 70,000-250,000
HAT T-Bar C

15,000-30,000
HAT T-Bar B

Density
   kg/l
   lb/gal

 1.43
11.9

1.22
10.2

Flash Point (Closed Cup)

 >93°C(>200°F)

>93°C(>200°F)

Mix Ratio
   by volume

 1

1

Technical Data Sheet for Lord 710 adobe.gif (112 bytes)

For more information about Lord 710 contact Bergdahl Associates, Inc.

ATTENTION - Documents with a adobe.gif (112 bytes) are stored in PDF format. In order to view and print them, you must have the FREE Adobe Acrobat Reader which is available by clicking the icon on this page. Adobe Acrobat Gif

Date issued: 09/05