Lord 7713
Layover primer for adhesive bonding of glass reinforced polyester substrates
Description
Lord 7713 is a single component, room temperature
curing primer which enhances adhesion
to a variety of substrates with most adhesives.
Features and Benefits
Low Viscosity -
easy to apply.
No dilution necessary.
Surface Preparation
Remove oils, dust, and other gross contaminates prior to priming.
Application
Apply Lord 7713 primer by spraying, dipping, brushing,
or rag wiping.
Curing
Lord 7713 primer will dry in less than two minutes
after application. If relative
humidity falls below 50% or if temperature falls below 24°C
(75°F), a longer dry time will be needed.
Storage
Lord 7713 primer contains chemically active materials which will react with water, alchols, amines and other compounds. Reseal open containers to maximize storage life. Cap containers with dry air or nitrogen each time after use.
Cautionary Information
Before using this or any Lord product, refer to the Material Safety Data Sheet (MSDS) and label for safe use and handling instructions.
For industrial/commercial use only. Must be applied by trained personnel only. Not to be used in house-hold applications. Not for consumer use.
For more information about Lord 7713 contact Bergdahl Associates, Inc.
| ATTENTION - Documents with a are stored in PDF
format. In order to view and print them, you must have the FREE Adobe Acrobat Reader which
is available by clicking the icon on this page. |
 |
Date issued: 07/05
V2 07/04