Lord Accelerator 26
No-Mix Accelerator for Acrylic Adhesive
Description
Lord® Accelerator 26
is a no-mix curative designed to be utilized with acrylic
adhesive resins. Accelerator 26
has no chlorinated solvents. This product can be used with the Lord 200
and 500 series acrylic adhesive resins.
Features and Benefits
Convenient Cure Properties - when used in conjunction with Lord adhesives, full properties are obtained at room temperature.
Extended Layover - once the accelerator has been applied and permitted to dry, the coated parts may be stored for 4 weeks if kept below 27°C (80°F), and out of direct sunlight.Flexible Application - can be brushed, wiped, sprayed or dipped onto one or both of the surfaces to be bonded. It will dry in approximately 15 minutes to an off-white crystalline film.
Extended Working Time - assembly time is not limited since the adhesive does not begin to cure until it comes in contact with the surface coated with the dry accelerator.
Excellent Environmental Resistance - when used with Lord acrylic adhesive resins, the resulting bond resists common environmental conditions.
For more information about Lord Accelerator 22 contact Bergdahl Associates, Inc.
| ATTENTION - Documents with a are stored in PDF
format. In order to view and print them, you must have the FREE Adobe Acrobat Reader which
is available by clicking the icon on this page. |
 |
Date issued: 07/05