Lord Accelerator 4
No-Mix Accelerator for Acrylic Adhesive
Lord® Accelerator 4 is a no-mix curative used with acrylic adhesive resins. Lord Accelerator 4 is not a stand alone adhesive; it must be used with acrylic adhesive resins. Lord Accelerator 4 can be used with Lord 200 and Lord 500 series acrylic adhesive resins.
Features and Benefits
Convenient Cure Properties - cures at room temperature and can be used with all Lord acrylic adhesive resins.
Extended Layover - allows dried parts to be stored for 4 weeks at temperatures <27°C (<80°F), if kept out of direct sunlight and free from dust and contaminants.
Flexible Application - allows for brush, wipe, spray or dip applications. Can be applied to one or both surfaces to be bonded and dries in approximately one minute to an off-white crystalline film.
Extended Work Time - prevents assembly delays as adhesive does not cure until it comes in contact with dry coated accelerator parts.
Environmental Resistance -
accompanies
Lord acrylic adhesive resins
to provide a bond which resists common environmental conditions.
For more information about Lord Accelerator 4 contact Bergdahl Associates, Inc.
| ATTENTION - Documents with a are stored in PDF
format. In order to view and print them, you must have the FREE Adobe Acrobat Reader which
is available by clicking the icon on this page. |
 |
Date issued: 07/05