|
Product |
Family |
Description |
|
#4 |
Acrylic |
No-mix accelerator for 200 & 500 Series |
|
#5 |
Acrylic |
Mix-in accelerator for 200, 400, or 500 Series (20:1 mix
ration by weight) |
|
#17 |
Acrylic |
Mix-in accelerator for 200,400, or 500 Series (10:1
ratio by weight or volume) |
|
#18 |
Acrylic |
Acrylic Mix-in accelerator for use with all Lord
acrylic adhesives (from 10:1 to 2:1 ratio by volume) |
|
#19 |
Acrylic |
Mix-in accelerator for 200, 400, & 500 Series; 648 (2:1
or 4:1 ratio by volume) |
|
#19 Blk |
Acrylic |
Mix-in black accelerator for 200, 400, & 500
Series (2:1 or 4:1 ratio by volume) |
|
#22 |
Acrylic |
Mix-in red accelerator for 200, 400 and 500 Series (2:1
or 4:1 ratio by volume) |
|
#26 |
Acrylic |
No-Mix accelerator for Lord 200 and 500 series acrylic
adhesive resins |
|
201 |
Acrylic |
Semi-flexible, Medium cure, Medium viscosity |
|
202 |
Acrylic |
Semi-flexible, Fast cure, Medium viscosity |
|
204 |
Acrylic |
Semi-flexible, Medium cure, High viscosity |
|
206 |
Acrylic |
Long working time |
|
304 |
Epoxy |
General-Purpose, High-Viscosity |
|
305 |
Epoxy |
General-Purpose,
Medium-Viscosity |
|
305-1 / 307-2 |
Epoxy |
General-Purpose, High-Viscosity |
|
306 |
Epoxy |
General-Purpose, High-Viscosity, Gap-Filling |
|
309 |
Epoxy |
General-Purpose, Thixotropic |
|
310 |
Epoxy |
Modified, Thixotropic |
|
312 |
Epoxy |
Low Viscosity |
|
320 |
Epoxy |
High Viscosity,
Toughened |
|
360 |
Epoxy |
Five-Minute Sandable |
|
363 |
Epoxy |
Two Component, Modified
Epoxy Adhesive |
|
370 |
Epoxy |
Impact Resistant, Black |
|
403 |
Acrylic |
Flexible, High impact &
peel resistance, Fast cure |
|
406 |
Acrylic |
Flexible, High impact &
peel resistance, Medium working time |
|
410 |
Acrylic |
Flexible, High impact &
peel resistance, Long working time |
|
506 |
Acrylic |
Simi-flexible, medium
cure, Medium viscosity |
|
510 |
Acrylic |
Fast cure |
|
513 |
Acrylic |
Fast cure, Non-sagging |
|
521 |
Acrylic |
Medium viscosity, Slow
cure |
|
551 |
Acrylic |
Sprayable, Medium cure |
|
648 |
Acrylic |
Low odor, Low flammability, non-sag |
|
710 |
Urethane |
Speaker-bonding
adhesive, two-component, equal-mix |
|
3170 |
Epoxy |
Adhesive System for
Cryogenic Applications |
|
5000 |
Cyanoacrylate |
Fast setting. High elasticity. Low
Viscosity. Colorless adhesive for bonding plastic-to-metal and
plastic-to-rubber. Very effective in bonding substrates with
differing coefficients of expansion. |
|
5019 |
Cyanoacrylate |
Fast setting. High
elasticity. Gap filling. Colorless.
Temperature resistance to 250ºF (121ºC).
Especially suitable for bonding dissimilar and porous
materials. Will qualify for USP Class VI approvals. |
|
5181 |
Cyanoacrylate |
High viscosity. Black general purpose
adhesive. Suitable for bonding porous substrates and materials with
different coefficients of thermal expansion. Repositioning of parts and
inspection of bonded assemblies is also possible. Especially useful in
loud speaker assembly. Resists temperatures to 250ºF (121ºC). |
|
6900 |
Cyanoacrylate |
Medium viscosity. Low order. Low bloom.
For bonding plastic and elastomers where high resistance to chlorosis and
blooming is important. |
|
7000 |
Cyanoacrylate |
Medium setting. Medium viscosity.
Moisture resistant. Especially useful for bonding slightly dirty or oily
metals to themselves and joining plastic-to metal. |
|
7412 |
Urethane |
Flexible, moisture-cure adhesive, single-component,
liquid |
|
7420 |
Urethane |
|
|
7500 |
Urethane |
100% solids,
two-component adhesive, paste, cures at room temperature
or with heat |
|
7520 |
Urethane |
100% solids,
two-component, equal-mix adhesive, non-sagging
|
|
7540 |
Urethane |
100% solids,
two-component, equal-mix adhesive, paste |
|
7540
W |
Urethane |
White, 100% solids,
two-component, equal-mix adhesive, paste |
|
7542 |
Urethane |
Two-component adhesive
bonds FRP, SMC and other plastics with little surface preparation. |
|
7550 |
Urethane |
Equal-Mix, Clear
Adhesive |
|
7556 |
Urethane |
Clear, equal-mix
adhesive |
|
7602 |
Urethane |
Single-pack, moisture
cure adhesive/sealant |
|
7610 |
Urethane |
Single-pack,
polyurethane sealant/adhesive |
|
7650 |
Urethane |
Single-component,
moisture-cure, high tack adhesive, liquid |
|
7660 |
Urethane |
Single-component,
moisture-cure, high tack adhesive, liquid |
|
7700 |
Cyanoacrylate |
Fast setting. High viscosity.
Impact resistant. General purpose adhesive for plastics, wood, cork and
leather. Will qualify for UPS Class VI approval. |
|
8300 |
Cyanoacrylate |
Medium setting. Medium viscosity.
For bonding O-rings and elastomeric materials. Suitable for bonding fore
difficult substrates such as EPDM and Viton®. |
|
8400 |
Cyanoacrylate |
Normal setting. Medium viscosity.
For bonding most plastic and elastomeric materials. Excellent drop control
and ability to bridge small tolerances. Well suited for bonding most
porous substrates such as foam rubber. |
|
9010 |
Cyanoacrylate |
Medium viscosity. Odorless and non-frosting.
General purpose adhesive formulated for cosmetically critical applications
because it will not etch thermoplastic surfaces. Will qualify for UPS Class VI
approval. |
|
9900 |
Cyanoacrylate |
Normal setting. High viscosity.
Odorless and non-frosting. For bonding to metal parts with require
gap-filling, impact and vibration resistance, and thermostabilty.
Well-suited for bonding non-ferrous metals. |
|
CA Gel |
Cyanoacrylate |
High viscosity.
General purpose applications. Non-stringing and
non-migrating. Can be used for bonding assemblies
with wide tolerances or large gaps. Ca be used on
overhead or vertical surfaces. For bonding metals,
rubber and most plastics. |
