PR-1432-GP is a corrosion inhibitive elastomeric coating. It has a service temperature range from -65°F (-54°C) to 250°F (121°C), with intermittent excursions up to 275°F (135°C). This material acts as an effective barrier against the common causes of corrosion on aluminum alloys or between dissimilar metals.
PR-1432-GP is a two-part, dichromate cured polysulfide compound. The uncured material is suitable for application by spray or brush. This material is not recommended for use without a top coating.
Technical Data Sheet for PR-1432-GP (pdf)
|BMS5-95 TY 1, F1||DTD900/6120||GMS11-13|
|STANDARD PACKAGING||No. per Case|
|Gallon Kit with 96 fl. oz. in a Gallon Can||4|
|Pint Kit with 12 fl. oz. in a Pint Can||16|
PR-1432GP comes in the following packaged configuration:
- Two-Part Can Kit packaged with part A and part B pre-measured into separate containers.
- Gallon Kit with 96 fl. oz. of sealant
- Pint Kit with 12 fl. oz. of sealant
- Other packaging configurations may be available.
Specification information provided for reference purpose only. Review specification QPL for verification or consult with engineering services.